[Alan] has been working on driving this WS2811 LED module with an AVR microcontroller. It may look like a standard six-pin RGB LED but it actually contains both an LED module and a microcontroller to ...

[Cunning_Fellow] published a post with three proof-of-concept approaches to driving a WS2811 LED pixel. We looked at a project early in December that used an AVR microcontroller to drive the RGB ...

- TinyS3 ESP32-S3 microcontroller - WS2811 LEDs - LED panel with a 5×10 serpentine layout starting at the bottom-left corner Components: - `main/app.c`: ESP32-S3 ...

If you are using a USB-powered device like the Photon 2 pictured below, you can use VUSB. If you are using a battery powered device with a LI+ connector, you can use that. If you have a large number ...