IEEE

Comparison of ultra-low-power and static CMOS full adders in 0.15 µm FD SOI CMOS

Abstract: Ultra-low-power and static CMOS full adders are implemented in a 0.15 mum FD SOI CMOS technology with 1.5 V supply. The power consumption of ultra-low-power full adder is shown to be half ...
IEEE

Analysis and design considerations of static CMOS logics under process, voltage and temperature variation in 90nm CMOS process

Abstract: In this paper, we analyze the circuit characteristic of static CMOS logics and provide the size ratio of PMOS to NMOS transistors under process, voltage and temperature (PVT) variations in ...
Scientific Research Publishing

Graph Modeling for Static Timing Analysis at Transistor Level in Nano-Scale CMOS Circuits ()

The development and the revolution of nanotechnology require more and effective methods to accurately estimating the timing analysis for any CMOS transistor level circuit. Many researches attempted to ...
EDN

Fully Static Flash-Based CMOS MCU

The PIC10F220 is a cost-effective, highly capable, 8-bit, fully-static Flash-based CMOS microcontroller (MCU). This microcontroller has two channels 8-bit analog to digital converter (ADC) and a 4 or ...
Scientific Research Publishing

C.-P. R. Liu and J. A. Abraham, “Transistor Level Syn thesis for Static CMOS Combinational Circuits,” Ninth Great Lakes Symposium on VLSI, Austin, 4-6 March 1999, pp. 172-175,

ABSTRACT: The development and the revolution of nanotechnology require more and effective methods to accurately estimating the timing analysis for any CMOS transistor level circuit. Many researches ...
GitHub

DESIGN OF 2:1 MULTIPLEXER USING CMOS LOGIC in 28nm

A multiplexer is a unidirectional device which is used in any application in which data must be switched from multiple sources to a destination. It is a combinational circuit which has a maximum of 2 ...
Design-Reuse

Low Power Universal Gates for Approximate Computing

Density and speed of IC’s have increased exponentially for several decades, following a trend described by Moore’s Law. While it is accepted that this exponential improvement trend will end, it is ...